Equine Dental Forceps

Equine Dental Forceps — Extraction Instruments for Equine Practice

Extracting an equine cheek tooth demands a grip that will not slip and leverage you can meter out gradually. Velmourne's range of equine dental forceps — also known as equine stomatology forceps — is built to that requirement: forged jaws that hold under load, secure joints, and handle lengths matched to the reach each tooth needs.

The range covers molar forceps, equine spreaders, three-prong and four-prong patterns, long-nose designs and compound versions, in 21″, 15″ and 12″ lengths. Pony and miniature patterns are held alongside the full-size instruments, so practices treating mixed caseloads can work from one set.

Why the Pattern You Choose Matters

Equine teeth erupt continuously, and uneven wear leaves hooks, sharp points and fractured caps that interfere with feeding and performance. Extraction is rarely a matter of force — it is a matter of the right dental extracting forceps applied at the right angle. A well-matched instrument gives you:

• A grip that holds on tall, tapered crowns without crushing them
• Leverage you can increase in controlled increments
• Reach to the caudal arcades without straining the jaw
• Reduced risk of fracturing the tooth or damaging surrounding gum
• Shorter procedure times, and less standing time for the horse

The Range

Full-size patterns — 21″

• Stomatology Forceps 21″, Set of 4 — four jaw patterns covering the common extraction scenarios in one case.
• Molar Forceps with Fulcrum, 21″ — the fulcrum converts hand pressure into controlled lift on larger molars.
• Premium Molar Forceps, 21″ — heavier build for repeated clinic use.
• Spreader Forceps, 21″ — widens the socket before extraction so the tooth releases rather than tears.
• Flat Spreader Forceps, 21″ — flat profile for gradual expansion in tighter sockets.
• Long Nose Forceps, 21″ — narrow nose for incisors and confined approaches.
• Four Prong Forceps, 21″ — four points of contact for the most stubborn molars.
• Three Prong, Off Side, 21″ — angled for lateral approach from the off side.
• Three Prong, On Side, 21″ — the matching near-side pattern.
• Reynolds Universal Cap Forceps — for retained caps, where a general-purpose grip is wanted.

Compound patterns — 12″

• Serrated Jaw Compound Molar, 12″ — serrations bite into worn enamel that smooth jaws slide off.
• Long Nose Compound, 12″ — compound action with a narrow working end.
• Four Prong Compound Cap, 12″ — compound leverage with four-point stability.

Pony and miniature patterns — 15″ and 12″

• Pony Spreader, 15″
• Pony Four Prong, 15″
• Pony Spreader, 12″
• Pony Four Prong, 12″
• Pony Molar, Serrated Jaw, 12″

Building a Set

Most practices start with a spreader, a four-prong and a long-nose in 21″ — that combination handles the majority of routine equine dental extractions. Pony patterns are added when the caseload calls for them, and compound forceps when caudal molars are a regular part of the work.

Every instrument carrying the Velmourne name is stainless steel and is checked under load before dispatch.

Frequently Asked Questions

What are equine dental forceps used for?

They are used to grip and extract equine teeth — incisors, cheek teeth and retained caps — with controlled leverage.

Which forceps should I use for an extraction?

It depends on the tooth. Long-nose patterns suit incisors and narrow approaches; three-prong and four-prong patterns suit molars where grip has to hold under sustained load; spreaders are used first, to open the socket.

What do spreader forceps do?

They widen the periodontal space around the tooth so it loosens gradually, rather than being pulled against an intact ligament.

Do I need a full set or individual instruments?

A set is more economical if you extract regularly across different tooth types. Individual instruments make sense when you are replacing or adding to an existing kit — there is no minimum order.

Are there patterns for ponies and miniatures?

Yes — the 15″ and 12″ pony patterns are proportioned for smaller mouths rather than simply shortened.

What is the difference between three-prong and four-prong?

Four points of contact distribute load more evenly and hold better on worn or fractured crowns. Three-prong patterns are lighter and easier to seat in tighter spaces.

What steel are they made from?

Stainless steel throughout, hardened and passivated. Jaws are designed to meet cleanly along their full length.

Are these suitable for someone learning?

Extraction is a trained procedure. The instruments are made for qualified veterinary and equine dental professionals.